Foam cleaner ANSERGLOB

Advantages

For foam gun
Manual application
Removes mounting foam
Degreaser
Does not contain acetone

Technical data

Flammability class	ВЗ (according to DIN 4102)
Cylinder temperature	from +5°С to +50°С
Operating temperature	from -15°С to +40°С

Download
instruction

Consumption
calculator

Colors
catalogue

Product certificates

ANSERGLOB foam cleaner for removing fresh remains of polyurethane foam and adhesive foam from the surfaces of window and door blocks, tools, clothing, etc. It is used for cleaning professional foam guns. It can also be used as a surface degreaser. The cleaner does not contain acetone. The cylinder has an additional spray valve for manual application.

To clean the foam gun, it is necessary to remove the used foam cylinder first. Press the hook of the gun and release the remaining foam. Shake the cleaner canister thoroughly, remove the protective cap and attach the manual spray nozzle to the canister valve. Then apply the liquid to the nozzle and gun seat. Wipe the treated areas with a dry cotton cloth. Remove the nozzle for manual spraying and screw the cylinder to the gun. Press the trigger of the gun several times until all the foam comes out and clear liquid starts to come out. Leave the gun with the cleaner for a certain time (2-3 minutes). Pull the trigger of the gun again to flush the remaining foam. Do not leave the cleaner bottle attached to the gun for a long time. During operation, keep the cylinder with the valve down. Work should be performed at temperatures from -15C to +40C. Do not use near hot surfaces, open flames, sparks, etc.

Foam output - up to 65 liters (depending on temperature and humidity).