Acrylic adhesive ANSERGLOV universal transparent is intended for gluing of the majority of water-absorbing building materials, such as, a tree, wood-like materials, plaster and polyurethane eaves, thermo-and sound-proofing materials, decorative and finishing products from rigid PVC, polystyrene, brick, etc. Suitable for wet areas (kitchens, showers, laundry rooms, public bathrooms, etc.). It is used for external and internal works. After hardening, a moisture-resistant, elastic transparent seam is formed. In the future, the glue can be painted. One of the surfaces must be water-absorbing, the other may be non-water-absorbing.
Preparation of the basis is carried out according to DSTU - N B A.3.1-23: 2013. The base must be dry and strong, free of dust, dirt, grease, oil paints. During repair work, before applying the glue, it is necessary to remove the fragile parts of the base, as well as the remnants of old materials. In some cases, for dedusting, strengthening weak absorbent mineral bases, the surface must be treated with deep permeable soil ANSERGLOB. After drying (3 - 6 hours) you can apply adhesive.
Acrylic universal glue ANSERGLOV transparent must be applied with a mounting gun. To do this, cut the tip of the cartridge above the thread with a knife, screw the cap and then cut off the top of the cap. The diameter of the cut should be appropriate. Then the cartridge is installed in the gun and applied under pressure with glue. It is possible to apply glue in strips or points. Then you need to connect and press the surfaces firmly together. One of the surfaces must be absorbent. It is recommended to carry out preliminary testing before carrying out the main gluing. Fresh, not hardened glue can be removed with water if necessary. The hardened glue is removed mechanically.
The consumption of glue depends on the condition of the surface, the method of application, the width and depth of the seam. At a seam thickness of 4-6 mm the expense makes to 15 meters.