facebook

Universal tinting concentrate

Technical data

Density 1,0 - 1,5 g / cm³
The number of colors 24 colors
Frost resistance is not less than 5 cycles
Shelf life 36 months
Surface temperature +5°С to +30°С
Exploration temperature -30°С to +80°С
ANSERGLOB universal tinting concentrate is intended for toning of enamels, oil and water-disperse paints, structural modeling paints, lime mortars, dry building mixtures, decorative acrylic and silicone plasters, putty and other materials. The first digit of the color number indicates the application area: 1 - for external and internal work, 2 - for internal work.

Note: The tint and the saturation of the tinted materials may be different from the color shown in the card, depending on the material used and the amount of the white pigment in it. The color and shade can be made independently, by mixing different tinting concentrates in any ratio between them. Do not use tinting concentrate as an independent product (paint). Store and transport in original packaging at a temperature no lower than -50 ° C and no higher than +50 ° C. The universal tinting concentrate can withstand about 5 freezing-defrost cycles. Defrost at room temperature overnight. When working, use personal protective equipment (glasses, gloves). Keep out of the reach of children.

211
160
221
154
172
152
212
162
173
174
240
151
213
171
223
175
245
244
163
220
232
161
242
190
Before use, shake the container for 30 seconds. Add the required portion of the concentrate to a small amount of material and mix thoroughly until it become homogeneous. Then add the resulting mixture wth constant stirring to the rest of the material and mix thoroughly until a mass will become homogeneous. To avoid differences in tone it is recommended to immediately colorize in one capacity all the necessary amount of material for the work. The maximum permissible concentration of the tinting concentrate is not more than 10% of the weight of the paint. Before starting work to determine the exact shade of the tinted material, it is necessary to conduct a trial painting.
X

Become a reseller

Leave your contact information, we will contact you shortly to discuss cooperation

X

FORM FOAM

X

Thank you, the application has been successfully sent!
Our manager will contact you as soon as possible

X

Thanks, your order has been successfully sent!
Our manager will contact you shortly

X

I want to work in anserglob






(doc, docx, pdf)

Attach resume